Table size: 1150 x 600 mm   Maximum Load: 1000 kg  T-Slot (Pitch x No. x W): 18 x 5 x 125 mm

X Axis Travel: 1050 mm   Y Axis Travel: 610 mm   Z Axis Travel: 610 mm   Spindle Taper: BT-40   Spindle bearing (ID): 70mm   Spindle nose to table surface:  125 – 735 mm

Spindle servo motor-cont./30 min.: Belt type spindle 11-15 kW Spindle speed 10000 rpm

Spindle servo motor-cont./30 min.: Gear drive spindle 7.5/11kW Spindle speed 8000 rpm

Spindle center to column guideway: 680 mm   Table front edge to door: 310 mm   Floor to table without leveling pads: 900 mm

X/Y/Z Rapid feed rate: 24/24/20 m/min    X/Y/Z Axis Cutting feed rate: 10 m/min   X/Y/Z Axis Ballscrew: 40/40/40 mm   Minimum setting: 0.001 mm

X/Y/Z Axis feed motor (Fanuc): 3.0/3.0/7.0 kW  ATC Arm type no. of tools: BT-40 / 24T   Tool change time (tool to tool): 2.3 sec.

Max tool diameter/length: 78/250 mm   Max tool diameter w/o adjacent tool: 120 mm  Max tool weight  8 kg  Coolant tank volume: 200 L

Lubrication tank volume: 4 L  Power required: 30 KVA   Pressurized air:5.5 – 7 kg/cm2   Machine dimension: 2950 x 2700 x 2950 mm

Machine weight: 6500 kg   Controller: Oi-MF / M80-4A / 828D